ECOFLOW & MULTIFLOW

Principle and Operation

With this type of recovery system, composed of 2 interconnected heat exchangers with a separate circuit, the heat transfer takes place through glycolised water which is continuously passed through the extract and supply air by use of a pump. The medium absorbs the energy from the extract air and transfers it to the fresh air. For Multiflow, multiple recuperators are combined per air flow.

Features and Focal Points

• Power can be controlled by a mixing valve (in case of no mixing valve: control by switching pump on/off)
• 100% guarantee of separated air flows and therefore especially suitable if no leakages between supply and extraction are allowed (no risk of contamination)
• Connection must always be carried out in countercurrent (water inlet side to air inlet side)
• Compact and flexible solution
• Several extraction units can be connected to 1 / more supply unit(s)
• Through the interposition of plate heat exchangers (water/water) these recuperators also enable heating and cooling
• Simple temperature control by 3-way valve
• ATTENTION: in conformity with Erp Ecodesign 2016-17. For Erp 2018, many rows and low passage velocities are required