Delbag Filtre Elemanları HVAC

Hava filtreleri, sayısı ve yüksekliği çalışma koşulları ile optimum uyum gösterecek şekilde tasarlanmış olan micro-glass-fiber kıvrımlardan oluşur. Kıvrımlar arasında en doğru mesafe ayırıcılar ya da HotMelt kıvrım teknolojisi ile sağlanır.  Filtre elemanları genel havalandırma ve iklim kontrol sistemlerinde ve bazı özel uygulamalar için kullanılır: (Yüksek sıcaklığa dayanıklı filtreler yüzey bitirme proseslerinde, yağ ve emülsiyon-duman ayrıştırılmasında ve yüksek kaliteli ön filtreler temiz oda alanlarında kullanılır.)  

  •  

    MULTIFORM, Filter classes M6, F7, F8, F9, E10, E11, E12

    During production, the filter medium made of micro-fibreglass fleece is pleated to form a stable package of folds. The number and the height of the folds are optimally designed to match operating conditions. The individual filter plates are arranged in a V-shape (in 4 compartments) inside a synthetic frame made of ABS, so as to assure a stable form of the filter plates, and are glued to assure airtightness.
  •  

    MULTIFORM ECO, Filter classes M5, M6, F7, F8

    During production, the filter medium made of micro-fiberglass fleece is pleated to form a stable package of folds. The number and the height of the folds are optimally designed to match operating conditions. The individual filter plates are arranged in a V-shape (in 3 compartments) inside a synthetic frame made of ABS. The 3 V compartments minimize pressure losses. The handles at the filter panels ensure easy on-site transport. The condensate tray collect excessive fluids to extend filter service intervals.
  •  

    MULTITHERM, Filter classes M6, F8

    The filter medium consists of deeply folded, paper-like micro-fibre fleece. The position of the folds is stabilized either by wave-shaped aluminium separators, or by filter-material strips to separate the folds. The filter package is inserted dry in a filter frame made of sendzimir-galvanized sheet steel, with grip protection on both sides. All materials satisfy stipulations pertaining to the absence of silicone, and are temperature resistant up to 250°C.
  •  

    MULTIPLAN, Filter classes M6, F7, F9

    The filter medium used is special, paper-like fleece made of superfine micro-glass fibres, which are processed to form a stable package of folds. As standard version, the filter element is provided with a peripheral seal on the intake (dusty)-air side. The filter frame is made of high-degree plastic. On special request the panel filter Multiplan is cast air-tight into its frame and can be manufactured either in a stable ABS plastic frame or an MDF frame.
  •  

    MULTICOL, Filter classes M6, F8

    For stabilization, these filters use wave-shaped aluminium separators instead of synthetic threads. The packages of folds are cast in a wooden or metal frame with polyurethane, so as to be airtight. The frames of filtration inserts are made of galvanized sheet with clamping flange on the inlet side (EF version) or on boths sides (DF version). There is a filtration block fixed to the frames, consisiting of two-layer hydro phobized filtration materials made of glass and synthetic fibers and of aluminum separators.
Bize Ulaşin

DencoHappel Klima Sanayi A.Ş.

Barbaros Bulvarı
Bulvar Apt No: 70/8
34349 Balmumcu - Istanbul
Turkey
+90 212 275 71 71
+90 212 275 54 28
Downloads

© 2017 DencoHappel. All rights reserved.