Výrobníky chlazené vody a tepelná čerpadla pro venkovní instalaci - vzduchem chlazené

Rozmanité a tiché

Díky využití nejmodernějších kompresorů a akustické izolaci kompresorových skříní se výrobníky chlazené vody a tepelná čerpadla vyznačují vysoce efektivním výkonem a velmi nízkou hlučností. Prakticky pro všechny modely jsou k dispozici také varianty tzv. supertichého provedení, čímž je zaručen bezproblémový provoz také v oblastech rezidenční zástavby. Rámy a panely těchto zařízení se skládají ze speciálně potažených ocelových plechů. V závislosti na modelu jsou používány plně hermetické spirálové kompresory nebo polohermetické šroubové kompresory.

  •  

    Chiller GLAC 2015 – 2081 CD1/2 (39 - 227 kW)
    Heat pumps GLAH 2015 – 2081 CD1/2 (42 - 230 kW


    General:

    • Optimized for space-saving configuration
    • Low-noise operation model
    • High efficiency model
    • Heat recovery system

     

    Refrigeration circuit:
    - Model with 2 scroll compressors in one refrigerant circuit
    - Electronic expansion valve EEV as standard for highly efficient model or optional
    - Plate heat exchanger
    - Micro-channel heat exchangers (MCHX)
    - Electronic pressure sensor for high and low pressure
    - Heat-pump cycle with 4-way valve (GLAH series)

    Hydraulics:

    - Air venting valves and drain valves
    Optional GLHM hydraulic module with
    - Water pump with standard or heavy-duty delivery head
    - 1 or 2 water pumps for redundant operation with automatic switch over according to time or in case of a malfunction
    - Pressure gauge
    - Safety valve
    - Expansion tank
    - Water filter and flow monitor available as accessories

    Control & regulation:

    - Unit main switch
    - Automatic circuit breakers for all electric consumers
    - Autoadaptive microprocessor control
    - Water inlet or outlet control
    - Automatic self-diagnostics
    - Alphanumeric display
    - Selection of various languages
    - Reading off alarm or error messages
    - Remote on/off contact
    - Collective fault message
    - Operation status message of unit
    - Actuation of the on-site pump (unit without GLHM)
    - Remote switch between heating/cooling mode (GLAH series)

    Accessories:
    - Master/slave operation with up to 5 units in one hydraulic circuit
    - Connection to the building management system via modbus, LonWorks and BACnet possible
    - Connection of an additional remote control
    - Many further extensive accessories available

    Areas of application:
    Cooling operation from -20 °C to +46 °C air inlet temperature
    Heating operation: from -10 °C to +35 °C  air inlet temperature

    *partially depending on selected accessories


    Deliverable in 8 different models:

    Chiller:
    • GLAC 2015 - 2070 CD1/2 as standard unit
    • GLAC 2015 - 2070 CD1/2.SL especially quiet version
    • GLAC 2015 – 2081 CD1/2.HE highly efficient version
    • GLAC 2015 – 2070 CD1/2.D as standard unit with heat recovery
    • GLAC 2015 – 2070 CD1/2.SD especially quiet version with heat recovery
    • GLAC 2015 – 2081 CD1/2.HD highly efficient version with heat recovery

    Heat pumps

    • GLAH 2015 - 2070 CD 1/2 as standard unit
    • GLAH 2015 – 2081 CD1/2.HE highly efficient version with option for extended operating range in heating operation

    • Outdoor installation
    • Scroll compressor
    • Heating
    • Cooling
    • Standard motor with axial fan and Ex protection (ATEX)
    • Refrigerant R-410A
    • Plate heat exchanger
    • Master/slave operation is possible
    • BMS integration is possible
    • Unit as high-performance model
    • Unit as low-noise model with extended operating limits
    • Unit as low-noise model
  •  

    Chiller GLAC 4131 – 8321 CD2 (354 - 885 kW)
    Heat pumps GLAH 4131 – 8321 CD2 (373 - 902 kW)


    General:

    - Optimized for space-saving configuration
    - Low-noise operation model
    - High efficiency model

    Refrigeration circuit:

    - Model with 4 to 8 scroll compressors in 2 to 4 refrigeration circuits
    - Electronic expansion valve EEV
    - Shell and tube heat exchanger
    - Micro-channel heat exchangers (MCHX)
    - Electronic pressure sensor for high and low pressure
    - Heat-pump cycle with 4-way valve (GLAH series)

    Hydraulics:
    - Air venting valves and drain valves
    Optional GLHM hydraulic module with
    - Water pump with standard or heavy-duty delivery head
    - 1 or 2 water pumps for redundant operation with automatic switch over according to time or in case of a malfunction
    - Pressure gauge
    - Safety valve
    - Expansion tank
    - Water filter and flow monitor available as accessories

    Control & regulation:

    - Unit main switch
    - Automatic circuit breakers for all electric consumers
    - Autoadaptive microprocessor control
    - Water inlet or outlet control
    - Automatic self-diagnostics
    - Alphanumeric display
    - Selection of various languages
    - Reading off alarm or error messages
    - Remote on/off contact
    - Collective fault message
    - Operation status message of unit
    - Actuation of the on-site pump (unit without GLHM)
    - Remote switch between heating/cooling mode (GLAH series)
    - Fan-speed regulation

    Accessories:
    - Master/slave operation with up to 5 units in one hydraulic circuit
    - Connection to the building management system via modbus, LonWorks and BACnet possible
    - Connection of an additional remote control
    - Many further extensive accessories available

    Areas of application:

    Cooling operation from -20 °C to +46 °C air inlet temperature
    Heating operation: from -12 °C to +35 °C  air inlet temperature

    *partially depending on selected accessories

    Deliverable in 5 different models:
    Chiller:
    • GLAC 4131 – 8321 CD2 as standard unit
    • GLAC 4131 – 8321 CD2.SL especially quiet version
    • GLAC 4131 – 8321 CD2.HE highly efficient version

    Heat pumps:
    • GLAH 4131 – 8321 CD2 as standard unit
    • GLAH 4131 – 8321 CD2.LT especially quiet version and expanded operating range in heating operation

    • Outdoor installation
    • Scroll compressor
    • Heating
    • Cooling
    • Standard motor with axial fan and Ex protection (ATEX)
    • Refrigerant R-410A
    • Shell and tube heat exchanger
    • Master/slave operation is possible
    • BMS integration is possible
    • Unit as low-noise model
    • Unit as low-noise model with extended operating limits
  •  

    Chiller GLAC 4061 – 4121 CD2 (159 - 352 kW)
    Heat pumps GLAH 4061 – 4121 CD2 (160 - 350 kW)


    General:
    - Optimized for space-saving configuration
    - Low-noise operation model
    - High efficiency model
    - Heat recovery system

    Refrigeration circuit:
    - Model with 4 scroll compressors in two refrigeration circuits
    - Electronic expansion valve EEV as standard for highly efficient model or optional
    - Plate heat exchanger or shell and tube heat exchanger
    - Micro-channel heat exchangers (MCHX)
    - Electronic pressure sensor for high and low pressure
    - Heat-pump cycle with 4-way valve (GLAH series)

    Hydraulics:
    - Air venting valves and drain valves
    Optional GLHM hydraulic module with
    - Water pump with standard or heavy-duty delivery head
    - 1 or 2 water pumps for redundant operation with automatic switch over according to time or in case of a malfunction
    - Pressure gauge
    - Safety valve
    - Expansion tank
    - Water filter and flow monitor available as accessories

    Control & regulation:
    - Unit main switch
    - Automatic circuit breakers for all electric consumers
    - Autoadaptive microprocessor control
    - Water inlet or outlet control
    - Automatic self-diagnostics
    - Alphanumeric display
    - Selection of various languages
    - Reading off alarm or error messages
    - Remote on/off contact
    - Collective fault message
    - Operation status message of unit
    - Actuation of the on-site pump (unit without GLHM)
    - Remote switch between heating/cooling mode (GLAH series)

    Accessories:
    - Master/slave operation with up to 5 units in one hydraulic circuit
    - Connection to the building management system via modbus, LonWorks and BACnet possible
    - Connection of an additional remote control
    - Many further extensive accessories available

    Areas of application:
    Cooling operation from -20 °C to +46 °C air inlet temperature
    Heating operation: from -10 °C to +35 °C  air inlet temperature

    *partially depending on selected accessories

    Deliverable in 8 different models:
    Chiller:
    • GLAC 4061 – 4121 CD2 as standard unit
    • GLAC 4061 – 4121 CD2.SL especially quiet version
    • GLAC 4061 – 4121 CD2 HE highly efficient version
    • GLAC 4061 – 4121 CD2.D as standard unit with heat recovery
    • GLAC 4061 – 4121 CD2.SD especially quiet version with heat recovery
    • GLAC 4061 – 4121 CD2.SD highly efficient version with heat recovery

    Heat pumps:
    • GLAH 4061 – 4121 CD2 as standard unit
    • GLAH 4061 – 4121 CD2 HE highly efficient version with option for extended operating range in heating operation

    • Outdoor installation
    • Scroll compressor
    • Heating
    • Cooling
    • Standard motor with axial fan and Ex protection (ATEX)
    • Refrigerant R-410A
    • Plate heat exchanger
    • Master/slave operation is possible
    • BMS integration is possible
    • Unit as high-performance model
    • Unit as low-noise model with extended operating limits
    • Unit as low-noise model
  •  

    Chiller GLAC 2150 – 3722 CAD2 (300 – 1700 kW)

    General:

    - Optimized for space-saving configuration
    - Low-noise operation model
    - High efficiency model

    Refrigeration circuit:

    - High-efficiency optimized version with 2 or 3 screw compressors
    - One screw compressor per refrigerant circuit for best possible redundancy
    - Screw compressor with continuously variable capacity control for constant water outlet temperature
    - Electronic expansion valve EEV
    - Shell and tube heat exchanger
    - Electronic pressure sensor for high and low pressure

    Hydraulics:

    - Optional GLPE hydraulic module with standard or inverter pump
    - Water pump available in two power output levels
    - 1 or 2 water pumps for redundant operation with automatically timed switch-over or in the event of a pump malfunction
    - Water filter and flow monitor available as accessories

    Control & regulation:

    - Unit main switch
    - Automatic circuit breakers for all electric consumers
    - Autoadaptive microprocessor control
    - Water inlet or outlet control
    - Automatic self-diagnostics
    - Alphanumeric display
    - Selection of various languages
    - Reading off alarm or error messages
    - Remote on/off contact
    - Collective fault message
    - Operation status message of unit
    - Actuation of the on-site pump (unit without GLPE)
    - Fan-speed regulation

    Accessories:

    - Master/slave operation with up to 5 units in one hydraulic circuit
    - Connection to the building management system via modbus, LonWorks and BACnet possible
    - Connection of an additional remote control
    - Many further extensive accessories available

    Areas of application:
    Cooling operation from -18 °C to +50 °C air inlet temperature

    *partially depending on selected accessories

    Deliverable in three different models:
    Chiller:
    GLAC 2150 – 3722 DA2 as standard unit
    GLAC 2150 – 3722 DA2.SL as especially quiet model
    GLAC 2150 – 3660 DA2.HE as highly efficient model

    • ErP 2018 ready
    • Refrigerant R-134a
    • Cooling
    • Outdoor installation
    • Screw compressor
    • Standard motor with axial fan and Ex protection (ATEX)
    • Shell and tube heat exchanger
    • Master/slave operation is possible
    • BMS integration is possible
    • Unit as low-noise model
    • Unit as high-performance model

Použití vysoce kvalitních komponent dokresluje využití deskových nebo trubkových výměníků jako výparníků a žebrovaných výměníků jako kondenzátorů. Tyto komponenty přispívají k celkově efektivnímu řešení.

V nabídce společnosti DencoHappel najdete vzduchem chlazené jednotky s axiálními ventilátory pro venkovní instalaci, v rámci série se spirálovými kompresory máte také na výběr jednotky s funkcí tepelného čerpadla nebo jednotky s funkcí Free-cooling s vysokým potenciálem úspory energie.

Kontaktujte nás

DencoHappel CZ a.s.

Slovanská 781
463 12 Liberec XXV - Vesec
Česká republika
+420 48 5225 111
+420 48 5225 112
Downloads
Oblasti aplikací

Výrobníky chlazené vody

  • GAC(N,P) 016 – 064 FD1
  • GLAC 2015 – 2081 CD1/2
  • GLAC 4061 – 4121 CD2
  • GLAC 4131 – 8321 CD2
  • GLAC 0751 – 2642 BA2
  • GLAC 2150 – 4840 CA2

Tepelná čerpadla

  • GAC (N/P) 016 - 064 FD1
  • GLAH 2015 - 2080 CD1/2
  • GLAH 4060 - 4120 CD2
  • GLAH 4131 - 8321 CD2

© 2017 DencoHappel. All rights reserved.